工法介紹：

    雙輪銑水泥土攪拌墻技術cutter soil mixing（簡稱“CSM工法”）該技術通過兩個銑輪繞水平軸旋轉切削破碎原位土體，并注入水泥漿液和氣體，形成等厚度的水泥土地下連續墻。該工法應用范圍廣泛，包括但不限于：深基坑支護（地鐵車站、建筑物基坑、高層建筑地下室、地下停車場等工程的止水帷幕和擋土墻）、地基加固（地基處理和地層改良）、防滲工程（防滲墻和抗?jié)B墻，有效控制基坑降承壓水）
    cutter soil mixing (csM)In this technology, two miling, wheels rotate around the horizontal axis to cut and break thein-situ soil, and inject cement slurrny and gas to form a continuous wall under the cement landof equal thickness. The construction method has a wide range ofapplications, including but notlimited to: deep foundation pit support (water curtain and retaining wall of subway stations,building foundation pits, high-rise building basements, underground parking lots and otherprojects), foundation reinforcement (foundation treatment and formation improvement),anti-seepage engineering (anti-seepage wall and anti-seepage wall, effectively control thepressure water reduction of foundation pit).

產品介紹：

    運用液壓成槽技術與深層攪拌技術的結合，可在土層、泥層、砂層、板結砂層、卵石層、風化巖土層、中風化巖土層等特殊地質條件下，銑削攪拌成墻施工。同時，液壓銑“一機兩用”，通過更換動力頭，可實現三削攪拌鉆機采用步履樁架作為工作平臺，軸、五軸攪拌鉆機功能，性價比高。
    The combination of hydraulic fluting, technology and deep mixing technology can be used for millingand mixing wall construction under special geological conditions such as soil layer, mud layer, sandlayer, plate sand layer, pebble layer, weathered rock layer and medium weathered rock layer. At thesame time, the hydraulic milling stirring, rig uses the walking pile frame as the working platform, "onemachine dual-use", through the replacement of the power head, can achieve three axis, five axis stirringrig function, cost-effective.

產品亮點：

• 銑削、切割、攪拌成墻均勻性好。
• 底部驅動，成槽效率高。
• 隨銑削攪拌深度增加變化，自動調節銑頭內壓力平衡。
• 可靠、穩定的擺刀切割攪拌，提高施工效率。
• 根據不同地質，可隨時加、減壓施工。
• 鉆桿采用高性能合金材料制造，確保成槽垂直度。
• 鉆桿夾持機構靈活、方便、可靠，可在任意位置夾持。
• 獨立泵站系統確保銑削、攪拌高效運行。
• 漿液、銑頭、成槽質量監測系統，確保成墻質量的控制
• 整機重心低、行走及施工穩定性好。

技術特性：

    氣保壓系統:隨銑削攪拌深度變化,自動調節銑頭內外壓力平 衡,提高設備使用壽命
    Air pressure-maintaining system: automatically adjusts the pressurebalance inside and outside the milling head as the milling and mixing depthchanges,thus improving the service life of the equipment

    質量監測系統:實時監測控制施工中的漿量、鉆進速度和垂直度,保證成樁攪拌效果

    Quality monitoring system: real-time monitoring and control of the slurryvolume, drilling speed and verticality during construction to ensure the pilemixing effect

    獨特銑輪結構:剛性強、精度高,可應對各種卵石層、密實砂層、風化巖石等復雜地層

    Unique milling wheel structure: strong rigidity and high precision, capableof handling various pebble layers, dense sand layers, weathered rocks andother complex formations

案例：

杭州	杭州	安吉